Advantages:
Small clearance between bearings and profile;
Relubrication only for PR types 4.055 – PR 4.063.
Precision axial, fixed, PR-type bearing
Precision axial, fixed, PR-type bearing
Advantages:
Small clearance between bearings and profile;
Relubrication only for PR types 4.055 – PR 4.063.
Bearings for heavy duty work PR 3.054 - PR 3.063
Benefits:
- Maximum resistance against dust and impurities in high load applications in the construction materials, metallurgy and mining industry;
- Radial lubricating front bearings;
- Axial bearings are shock-resistant with 2RS gaskets, lubricated for life;
- Axial adjustment with washers;
- For high speed applications, up to 2 m / sec;
Bearing combined with KB bolt
Benefits:
- Free choice of bolt assembly;
- The bolt can be welded or screwed as required.
- 0.5 mm and 1.0 mm thick blades are available on request.
Bearing combined with KB bolt
Benefits:
- Free choice of bolt assembly;
- The bolt can be welded or screwed as required.
- 0.5 mm and 1.0 mm thick blades are available on request.
Radial bearings
Radial Bearing Features:
- The outer rings are made of hardened steel UNI 16 CrNi 4 hardened to 62 + 2HRC
- The inner rings are made of steel for bearings En 31-SAE 52100 hardened to 62-2 HRC
- Cylindrical rolls have flat ends made of En 31-SAE 52100 hardened steel at 59-64 HRC
- The welding bolts are made of S355 J2G3 material
- Bolt tolerance – 0.05 mm
- Bearings from 2.054 to 2.063 can be relubricated.
- The bearings are lubricated with grade 3 grease (e.g., Shell Alvania 3, Esso Beacon 3)
JT adjustable bearing unit
Benefits:
- The radial and axial play can be adjusted by threaded bolts;
- High radial and axial accuracy;
- High resistance to aggressive media (dust, dirt);
- For high speed applications, up to 2 m / sec;
JT adjustable bearing unit
Benefits:
- The radial and axial play can be adjusted by threaded bolts;
- High radial and axial accuracy;
- High resistance to aggressive media (dust, dirt);
- For high speed applications, up to 2 m / sec;
Combined JUMBO axle adjustable bearing
Adjustment of the dimension (A) is achieved by turning the bolt on the side of the tread. The bolt is eccentric and has 5 adjustment positions. The radial bearing can be lubricated.
Combination bearings system WINKEL
Contain:
- Activator (6 months red, 12 months gray);
- High performance grease lubrication system WHF 04;
- Support (stainless steel);
- Nylon tube L = 2000 mm;
- Connector M6;
- Nipple R ¼ (for tube pre-filling);
Combination bearings system WINKEL
Contain:
- Activator (6 months red, 12 months gray);
- High performance grease lubrication system WHF 04;
- Support (stainless steel);
- Nylon tube L = 2000 mm;
- Connector M6;
- Nipple R ¼ (for tube pre-filling);
Combined precision, axial, adjustable blade
- Adjustment of the dimension (A) is achieved by insertion between the main bearing body and the housing on the tread side;
- 0.5 mm and 1.0 mm thick blades are available on request;
- Special bolts on request;
Combined roller bearing with OLIAMID insert
- The adjustment (A) is achieved by positioning an insert between the main bearing body and the oily insert;
- If necessary, there are available blades with thicknesses of 0.5 and 1.0 mm;
- Upon request, special bolts can also be provided;
Combined roller bearing with OLIAMID insert
- The adjustment (A) is achieved by positioning an insert between the main bearing body and the oily insert;
- If necessary, there are available blades with thicknesses of 0.5 and 1.0 mm;
- Upon request, special bolts can also be provided;
Combined drive unit TIPE JC | Standard Profile
Benefits:
- Minimum play between the bearing unit and the profile;
- High positioning accuracy;
Axial adjustable blade bearing
Axial bearing adjustment:
- Adjustment of dimension (A) is achieved by insertion between the main body of the bearing and the case with the tread;
- 0.5 mm and 1.0 mm thick blades are available on request;
- Special bolts on request;
Axial adjustable blade bearing
Axial bearing adjustment:
- Adjustment of dimension (A) is achieved by insertion between the main body of the bearing and the case with the tread;
- 0.5 mm and 1.0 mm thick blades are available on request;
- Special bolts on request;
Axial drive with adjustable eccentric
The bearings are lubricated for life.
Axial bearing adjustment:
- loosen the screws;
- rotate the eccentric spindle (The axial bearing will be turned);
- check the AA quota (if necessary, repeat pos. 2);
- secure bolts with Loctite;
- tighten the screws;
Axial precision ball bearing with adjustable eccentric
Benefits:
- Minimum play between bearing and profile;
- The bearings are lubricated for life.
Axial precision ball bearing with adjustable eccentric
Benefits:
- Minimum play between bearing and profile;
- The bearings are lubricated for life.
Combined HT type high-pressure roller
- Combined Heat Bearings are made for use in high temperature applications up to 250 ° C;
- Combined bearings have C3 tolerance, high temperature grease and viton gaskets;
- Relubrication only for models 4.055 HT – 4.063 HT;
Axle fixed bearing
Relubrication only for models 4.055 – 4.063
Axle fixed bearing
Relubrication only for models 4.055 – 4.063
Bearings combined with stainless steel balls
- With radial and axial ball bearings;
- For applications with high speeds;
Combined bearings with VD drive type
Advantages of combined drive bearings Type VD:
- With drive shaft;
- Silent running due to VULKOLLAN-coated bearings;
- Rolling speed up to 5 m / sec. Acceleration max 2.5 m / sec2;
- Low friction of 2RS precision ball bearings;
- High wear resistance.
Combined bearings with VD drive type
Advantages of combined drive bearings Type VD:
- With drive shaft;
- Silent running due to VULKOLLAN-coated bearings;
- Rolling speed up to 5 m / sec. Acceleration max 2.5 m / sec2;
- Low friction of 2RS precision ball bearings;
- High wear resistance.
Combination Precision Bearing with Bolt and KB Insertion Type KB PR P
Benefits:
- Free choice of bolt assembly;
- The bolt can be welded or screwed as required;
Precision radial bearings PR type
Characteristics:
- The outer rings are made of UNI 16 CrNi 4 hardened steel at 62 + 2HRC;
- The inner rings are made of steel for bearings En 31-SAE 52100 rated 62-2 HRC;
- Cylindrical rolls have flat ends made of En 31-SAE 52100 grade steel at 59-64 HRC;
- The welding bolts are made of S355 J2G3 material;
- Bolt tolerance – 0.05 mm;
- Bearings from 2.055 to 2.063 can be relubricated;
- The bearings are lubricated with grade 3 grease (e.g., Shell Alvania 3, Esso Beacon 3).
Precision radial bearings PR type
Characteristics:
- The outer rings are made of UNI 16 CrNi 4 hardened steel at 62 + 2HRC;
- The inner rings are made of steel for bearings En 31-SAE 52100 rated 62-2 HRC;
- Cylindrical rolls have flat ends made of En 31-SAE 52100 grade steel at 59-64 HRC;
- The welding bolts are made of S355 J2G3 material;
- Bolt tolerance – 0.05 mm;
- Bearings from 2.055 to 2.063 can be relubricated;
- The bearings are lubricated with grade 3 grease (e.g., Shell Alvania 3, Esso Beacon 3).
Combined precision ball bearing with KB PR bolt
Benefits:
- Free choice of bolt assembly;
- The bolt can be welded or screwed as required.
- 0.5 mm and 1.0 mm thick blades are available on request.
Combination bearing with bolt and KB P type ollamide insert
Benefits:
- Free choice of bolt assembly;
- The bolt can be welded or screwed as required.
- * Oilamide is a high strength self-priming polyamide.
Combination bearing with bolt and KB P type ollamide insert
Benefits:
- Free choice of bolt assembly;
- The bolt can be welded or screwed as required.
- * Oilamide is a high strength self-priming polyamide.
Combined Precision, adjustable, with OLIAMID insert
- Adjustment of dimension (A) is achieved by inserting between the main bearing body and the Oilamid insert.
- 0.5 mm and 1.0 mm thick blades are available on request.
- Special bolts on request.