Quick-Lift Rail 50i/125i/200i/300i/600i

Lifting capacity of up to 50/125/200/300/600kg.
Intelligent lifting device which meets the highest standards of ergonomics, working environment, safety and efficiency.
Powerful precision makes the Quick-Lift Rail 600i easy to use.
Exceptional safety is achieved using our intelligent control systems.
High-cost efficiency through low power consumption, high reliability and long durability.

More info

QLR 50iQLR 125iQLR 200iQLR 300iQLR 600i

Quick-Lift Rail 50i/125i/200i/300i/600i

Lifting capacity of up to 50/125/200/300/600kg.
Intelligent lifting device which meets the highest standards of ergonomics, working environment, safety and efficiency.
Powerful precision makes the Quick-Lift Rail 600i easy to use.
Exceptional safety is achieved using our intelligent control systems.
High-cost efficiency through low power consumption, high reliability and long durability.

More info

QLR 50iQLR 125iQLR 200iQLR 300iQLR 600i

Quick-Lift Rail Torque 350s

The solution includes adaptation of the QLR 125i with a vertical torque arm and torque trolley; torque attachment and a horizontal frame must be added at Binar Quick-Lift Systems AB.
The arm and vertical torque lengths must be calculated individually. This is done by Binar Quick-Lift Systems AB in cooporation with resale office and customer. It is recommended to add a pneumatic brake/halt system.

More info

Quick-Lift Driven 125i/300i

The rail system, Quick-Lift Driven 300i (QLD 300i) is a unique, motorized lifting device that easily covers large areas horizontally, with a lifting load up to 300kg. It is an excellent versatile system for production lines as well as for working at various stations simultaneously. With this equipment, you improve ergonomics and increase productivity without impairing precision and safety.
It is delivered preassembled with one lifting motor and three motors for the movement in X and Y directions. The control handle can be attached to a standardized or customized End Effector used to lift and handle a specific object determined by the customer. As the QLD was designed with a narrow width, it can easily be assembled into existing rail systems. Equipped with a wireless communication system, the handle can be accessed conveniently during maintenance and service.

QLD 125iQLD 300i

Quick-Lift Driven 125i/300i

The rail system, Quick-Lift Driven 300i (QLD 300i) is a unique, motorized lifting device that easily covers large areas horizontally, with a lifting load up to 300kg. It is an excellent versatile system for production lines as well as for working at various stations simultaneously. With this equipment, you improve ergonomics and increase productivity without impairing precision and safety.
It is delivered preassembled with one lifting motor and three motors for the movement in X and Y directions. The control handle can be attached to a standardized or customized End Effector used to lift and handle a specific object determined by the customer. As the QLD was designed with a narrow width, it can easily be assembled into existing rail systems. Equipped with a wireless communication system, the handle can be accessed conveniently during maintenance and service.

QLD 125iQLD 300i

Parking brake for Quick-Lift Rail 125i

Pneumatic parking brake can be applied to the Quick-Lift Rail 125i (QLR 125i).
The parking brake is designed to optimize and streamline the operator’s daily work. With a manual push button on the control unit, the operator selects when the rail stops or is in movement, which provides a more ergonomic work phase for the operator. The parking brake prevents work related injuries or constraints caused by rapid deceleration. Are not sold separately – but only in the combination of a new Quick-Lift Rail.

Stop-and-Go System for Quick-Lift Rail 125i

The brake system, Stop-and-Go System is designed to improve the repetitive work tasks but still maintains a high level of safety and ergonomics.
The Stop-and-Go System is ideal for the operator who works over a larger working radius. The brake function is programmed to adopt the operator’s working speed while reloading and moving workloads within the required working radius.
The braking system is activated when the operator reaches the fixed loading and unloading points thus making load stopping easy on the operator. Thanks to preprogrammed time intervals, the brake system is deactivated when the operator is ready to change the work position.
Not sold separately – only with a new Quick-Lift Rail

More info

Stop-and-Go System for Quick-Lift Rail 125i

The brake system, Stop-and-Go System is designed to improve the repetitive work tasks but still maintains a high level of safety and ergonomics.
The Stop-and-Go System is ideal for the operator who works over a larger working radius. The brake function is programmed to adopt the operator’s working speed while reloading and moving workloads within the required working radius.
The braking system is activated when the operator reaches the fixed loading and unloading points thus making load stopping easy on the operator. Thanks to preprogrammed time intervals, the brake system is deactivated when the operator is ready to change the work position.
Not sold separately – only with a new Quick-Lift Rail

More info

NEO 30

Control Handle

Manipulator Arms

Quick-Lift Rail Systems

End Effectors

Ergo Glass End Effectors

Request a quote right now!

Contact